11 July 2024
Bluejay Mining plc / Ticker: JAY / Market: AIM / Sector: Mining
Significant Source Rock Titanium at Dundas Ilmenite Project
Bluejay Mining plc ('Bluejay' or the 'Company'), the AIM, FSE listed and Pink-Market traded exploration and development company with projects in
Key Highlights
· 74 bedrock samples returned an average of 11.12 % ilmenite (5.2 % TiO2)
· Bedrock samples consistently show almost double the values of contained ilmenite than the existing JORC compliant resource estimate of 117 Mt at 6.1% ilmenite within the Project's raised and active beach environments
o The presence of an underlying, titanium-rich sill offers additional exploration targets and resource expansion potential
· 10 Gt of ilmenite is estimated to remain within the Steensby Land Sill Complex (GEUS Report 2017/18)
o The current exploration licenses along with the recently applied for license enlargement at Dundas cover 98% of the sill complex considered in the estimate
· This marks the first systematic evaluation of the Steensby Land Sill Complex as a hard-rock source of titanium, presenting a significant target for exploration, alongside its existing Copper, Gold and Silver potential
Bluejay has initiated a comprehensive evaluation of the Steensby Land Sill Complex as a potential source of hard-rock titanium. This evaluation complements the existing JORC compliant 2019 Mineral Resource Estimate (MRE) of 117 Mt at 6.1% ilmenite. The project area features ilmenite-rich sills underlying raised and active beaches. In 2022, drilling efforts at the Dundas Project recovered bedrock samples from 74 locations. As part of the ongoing re-evaluation of the Dundas Project, these samples have been analysed in Q2 of 2024 at ALS Laboratories, revealing an average TiO2 concentration of 5.2% and a corresponding ilmenite content of 11.12%, significantly surpassing resource estimates for the raised and active beach sand deposits. Bluejay also reports results from rock samples analysed during the 2018 drilling campaign, which are previously unreleased to market.
Eric Sondergaard, Managing Director of Bluejay Mining, commented:
"We are thrilled by the latest hard-rock assay results from the Dundas Ilmenite Project, which reveal a substantial increase in ilmenite grade from the sand deposit. The confirmation of a shallow titanium-rich sill, directly beneath the current mineral sand deposit, presents an exciting new exploration opportunity and will hopefully significantly enhance the projects resource potential. Importantly, this initial assessment was performed at a very low cost compared to a stand-alone exploration program at the Project.
Dundas, as a stand-alone mineral sand deposit, enjoyed few of the benefits associated with deposits located in temperate localities. By evaluating the project as a mining operation at nearly double the grade this would offer considerable benefits to the Project economics and obtain economy of scale that was previously difficult at current prices. The attention currently garnered by other rock titanium deposits such as Pitfield,
The Company will now aim to undertake a low cost JORC compliant exploration target, to further advance the concept"
Market Abuse Regulation (MAR) Disclosure
The information contained within this announcement is deemed by the Company to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 ('MAR') which has been incorporated into
For further information please visit http://www.bluejaymining.com or contact:
Eric Sondergaard |
Bluejay Mining plc |
enquiry@bluejaymining.com |
Ewan Leggat / Adam Cowl |
SP Angel Corporate Finance LLP |
+44 (0) 20 3470 0470 |
Tim Blythe / Megan Ray / Said Izagaren |
BlytheRay |
+44 (0) 20 7138 3205 |
2024 Assay Results from 2022 Bedrock Intercepts
Sample Number |
S.G. |
TiO2 |
Ilmenite |
Sample Number |
S.G. |
TiO2 |
Ilmenite |
|
% |
% |
|
% |
% |
||
HR22001 |
|
4.74 |
10.1 |
HR22038 |
|
4.19 |
8.9 |
HR22002 |
|
3.39 |
7.2 |
HR22039 |
|
4.67 |
10 |
HR22003 |
|
3.79 |
8.1 |
HR22040 |
|
4.53 |
9.7 |
HR22004 |
|
6.64 |
14.2 |
HR22041 |
3.09 |
5.76 |
12.3 |
HR22005 |
3.06 |
5.66 |
12.1 |
HR22042 |
|
4.72 |
10.1 |
HR22006 |
|
5.68 |
12.1 |
HR22043 |
|
4.77 |
10.2 |
HR22007 |
|
6.5 |
13.9 |
HR22044 |
|
5.31 |
11.3 |
HR22008 |
|
6.17 |
13.2 |
HR22045 |
3.07 |
5.96 |
12.7 |
HR22009 |
3.1 |
4.48 |
9.6 |
HR22046 |
|
3 |
6.4 |
HR22010 |
3.08 |
5 |
10.7 |
HR22047 |
|
0.64 |
1.4 |
HR22011 |
|
5.99 |
12.8 |
HR22048 |
|
6 |
12.8 |
HR22012 |
|
6.93 |
14.8 |
HR22049 |
|
5.97 |
12.7 |
HR22013 |
3.07 |
5.63 |
12 |
HR22050 |
3.05 |
5.54 |
11.8 |
HR22014 |
|
6.22 |
13.3 |
HR22051 |
|
6.25 |
13.3 |
HR22015 |
|
6.11 |
13 |
HR22052 |
|
6.45 |
13.8 |
HR22016 |
|
6.21 |
13.2 |
HR22053 |
3.12 |
6.43 |
13.7 |
HR22017 |
3.08 |
5.99 |
12.8 |
HR22054 |
|
5.04 |
10.7 |
HR22018 |
|
5.6 |
11.9 |
HR22055 |
|
5.06 |
10.8 |
HR22019 |
|
3.73 |
8 |
HR22056 |
|
5.37 |
11.5 |
HR22020 |
|
4.32 |
9.2 |
HR22057 |
3.09 |
5.57 |
11.9 |
HR22021 |
3.11 |
6.87 |
14.7 |
HR22058 |
|
5.69 |
12.1 |
HR22022 |
|
4.92 |
10.5 |
HR22059 |
|
5.05 |
10.8 |
HR22023 |
|
2.54 |
5.4 |
HR22060 |
|
4.47 |
9.5 |
HR22024 |
|
3.92 |
8.4 |
HR22061 |
3.01 |
4.22 |
9 |
HR22025 |
3.1 |
5.89 |
12.6 |
HR22062 |
|
3.82 |
8.1 |
HR22026 |
|
5.07 |
10.8 |
HR22063 |
|
4.96 |
10.6 |
HR22027 |
|
5 |
10.7 |
HR22064 |
|
4.81 |
10.3 |
HR22028 |
3.12 |
6.56 |
14 |
HR22065 |
2.97 |
4.01 |
8.6 |
HR22029 |
|
5.37 |
11.5 |
HR22066 |
|
2.48 |
5.3 |
HR22030 |
|
5.55 |
11.8 |
HR22067 |
|
5.74 |
12.2 |
HR22031 |
|
5.79 |
12.3 |
HR22068 |
|
5.74 |
12.2 |
HR22032 |
|
5.88 |
12.5 |
HR22069 |
3.09 |
6.21 |
13.2 |
HR22033 |
3.08 |
5.64 |
12 |
HR22070 |
|
5.97 |
12.7 |
HR22034 |
|
5.69 |
12.1 |
HR22071 |
|
6.05 |
12.9 |
HR22035 |
|
6.01 |
12.8 |
HR22072 |
3.07 |
5.57 |
11.9 |
HR22036 |
|
5.08 |
10.8 |
HR22073 |
|
5.63 |
12 |
HR22037 |
3.02 |
4.85 |
10.3 |
HR22074 |
|
4.59 |
9.8 |
TiO2 to Ilmenite conversion factor: 0.4689. Samples were prepared at ALS Outokumpu,
Maps of Sample Locations with Bedrock Intercept Assay Results
Figure 1. Assay results for 2022 bedrock sample locations at Moriusaq with 2018 excavator trench bedrock assay results
Figure 2. 2022 and historic bedrock sample locations and assay results at Moriusaq and Iterlak East
Steensby Land Sill Complex
The Steensby Land Sill Complex consists of approximately 15 sills intruded concordantly into the Dundas Formation during the Neoproterozoic around 700 Ma. These sills vary in thickness, ranging up to 100 meters thick, with most falling between 20 and 50 meters. They exhibit both age and compositional variations, suggesting multiple magmatic events. The sills are prominently exposed as buttresses and ledges, making them easily identifiable from aerial surveys. Those exposed on dip-slopes often undergo intense weathering, transforming into gravel. Comprised of high TiO2 and P2O5 dolerites, these sills and associated dyke rocks likely underwent significant fractionation within a thick lithospheric setting characteristic of continental rifting environments (Dawes, 2006).
Estimated Accumulated Thickness of Sills in Moriusaq East and West |
||
|
Moriusaq East |
Moriusaq West |
Total Stratigraphic Thickness |
~900 m |
~1000 m |
Number of Sills |
~14 |
12-14 |
Measured Thickness of Sill Material |
~280 |
300 - 350 m |
Thickness Assuming a 20m Thickness of Sills |
~280 |
240 - 280* |
Vol. % Sill Measured |
~31 |
30 - 35 |
Vol. % Sill Modelled |
~31 |
Min. 24 - 28** |
Table from GEUS Report 2017/18, likely underestimated values due to the presence of thick or multiple sills
Ilmenite Tonnages Calculated for Steensby Land Sill Complex |
|
Ilmenite contained in sills prior to erosion |
17 Gt |
Ilmenite remaining in sills after erosion |
10 Gt |
Ilmenite available for sedimentation |
7 Gt |
Table from GEUS Report 2017/18
The GEUS estimate of 10 Gt of ilmenite at 7 wt. % remaining within the hard-rock environment is noted to be conservative due to factors such as a density value of 2.6 being used compared to an expected value of approximately 3. Bluejay conducted specific gravity measurements on 19 of the 74 samples which confirms the underestimation, returning an average SG of 3.07. Further factors deemed conservative are a 400 m total thickness and a 20 m sill thickness from a common range of 20-50 m. The current and applied for Dundas Titanium exploration licenses cover 98% of the ilmenite tonnage calculation area from the 2017/18 GEUS report.
About Bluejay Mining plc
Bluejay is listed on the London AIM market and Frankfurt Stock Exchange and its shares also trade on the Pink Market in the US. With multiple projects in
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.